LINE THERMAL PRINTER MECHANISMS
LT1322

Classification to thermal printer mechanism

Classification by "Operating voltage" 5V 24V

Classification by "Paper roll width" 58mm 60mm 80mm 112mm

2 Stations 38mm + 38mm 50mm +50mm

"EP Series" Printer Mechanisms "EP Series" Printer Mechanisms

LT1322

Paper roll

38mm + 38mm
2 station

80mm/sec
Printing Speed

Features
Specifications
Type Classification

Features

2 station printing
38+38mm paper width
24V operation
Print speed: Max. 80 mm/sec

Papge Top

Features
Specifications
Type Classification

Specifications

Printing method		Thermal dot line printing
Total dots		248 dots/line × 2
Dot density		8 dots/mm
Printing width		38mm × 2
Printing speed		Max. 80mm/sec (640 dot-lines/sec)
Paper feeding pitch		0.125mm
Sensors	PE sensor	Photo-interrupter × 2
	Head temperature	Thermistor
	Head-up	Photo-interrupter
Operating voltage range *1	Vp	DC 22.8 to 25.2V
Operating voltage range *1	Vdd	DC 4.75 to 5.25V
Current consumption	Head	Max.: 4.5V approx.
Current consumption	Motor	Max.: 0.4A approx.
Recommended paper	Width	38mm × 2
	Thickness	60 to 75µm
	Paper diameter *2	φ83mm or less
	Paper (Manufacturer)	TF50KS-E2C (Nippon Paper)
Reliability *3	Head pulse-resistance	50 million pulses or more
Reliability *3	Haed wear-resistance	50km or more
Environment	Operation	Temperature: 0 to 45°C Humidity: 35 to 85% RH
Environment	Storage	Temperature: -20 to 60°C Humidity: 10 to 90% RH
External dimensions		120 (W) × 58 (D) × 24.5 (H) mm
Weight		Approx. 97g

(*1): Voltage drop at maximum current may cause the print quality problem. Please check it carefully in your environment such as control board, wiring, etc. Also please keep the voltage within the speci? ed voltage range even by the voltage drop.

(*2): The number of diameter varies depending on the conditions.

(*3): Normal temperature at 25°C, normal humidity, 12.5% printing ratio, rated energy and by use of the recommended print paper.